All plastic not easy to lose color outdoor playground for display with simple construction TQ-QS015

Daily cleaning and maintenance is essential if the amusement equipment is to extend its service life and ensure safety and hygiene. So, do you know how to clean and maintain your play equipment? Below, we will organize the analysis of the maintenance skills of the inventory equipment, let's take a look!
First, if it is indoor activity room, floor, wall, etc., it needs daily ultraviolet radiation disinfection, and the room should be ventilated frequently. Disinfect once a week with hydrogen peroxide spray.
Second, when the circuit electrical part is cleaned, first of all, it must be ensured that the power is cut off, and the watering is prohibited. Generally, it is scrubbed with a damp cloth. After the device is completely dry, connect the power supply.
Third, if the metal part is going to rust, you can use a brush to remove the rust and wipe it with a dry cloth; after exposure to the sun, you can buy a colorless self-spraying paint, and spray it again and again at a distance of 20 cm. After drying, spray again to protect the body. After the paint is completely dry, it is washed, dried and disinfected.
4. The soft sponge part can be scrubbed with a soft cloth dampened with soapy water or placed in the sun for exposure and disinfection.
Amusement equipment cleaning and maintenance tips Eight strokes clean without leaving a dead end
5. All amusement equipment, such as open-air slides and drill cylinders, should not have accumulated water after rain. If there is accumulated water, a small hole with a diameter of about 4 mm should be used at the lowest point for drainage.
Sixth, the moisture-resistant, heat-resistant, non-fading wooden part can be washed with soapy water and dried, then sprayed with 84 disinfectant.
7. Plastic parts and glass fiber can be diluted with soapy water, disinfecting washing powder, bleaching powder, etc., then wiped with a soft cloth or soft brush, rinsed with water, dried with a cleaning cloth or dried. Finally, spray disinfection with 84 disinfectant.
8. Of course, at the same time, it is necessary to check whether the connection part is firm, the metal is frequently connected, the fuel is added, and the circuit electrical appliances and ordinary parts are damaged.

Wenzhou Kidsplayplay Toy Co., Ltd. (www.tqplayground.com) is located in Linhai, Taizhou, an excellent tourist city in China. The company covers an area of ​​more than 20,000 square meters. It started from a mold company ten years ago and developed into more than 100 employees. Name, including a group of high-quality technology and management talents with years of experience in rotomolding molds, is a rotomolding mold and children's play equipment company integrating design, development, production and sales.

In May 2011, the company cooperated deeply with Zhejiang Yingbo Amusement Equipment Co., Ltd., and merged with Zhejiang Tianqi Rotational Mould Co., Ltd. in March 2017, unified management, unified management, and achieved substantial breakthroughs in the indoor naughty castle field. Amusement equipment that meets the German EN1176 standard is dedicated to children around the world. Adhering to the goal of “going to the world and rolling the world”, the company is committed to expanding overseas markets. The company's English website www.tanqplay.com, March 2012, with the company's continuous improvement in the Southeast Asian market, Tianqi Amusement Thailand branch TQ (Thailand) Co., Ltd (website: th.kaidiplay.com) and Malaysia Company TANQ EQUIPMENT SDN BHD (website: www.my.kaidiplay.com), and Mexico branch TQ PLAYGOUND CO., LTD. (website: www.tqplay.com), Russian branch Kidsplay Toy Co.. (website: www .ru.kaidiplay.com) has been established one after another, opening a new page on the road to the world and rolling the world.

Management policy: The company adheres to the concept of 'all for the safety of children, all for the health of children, all for the development of children' concept. We have consistently provided our customers with products with high safety performance, strong entertainment interest, strong structural design reliability, elegant appearance and international standards. Establish a customer-centric service concept to protect the interests of customers from the root and the source.

Main products: rotomolding molds, outdoor large-scale amusement equipment, indoor naughty castles, outdoor combination slides and plastic accessories. Suitable for large shopping malls, supermarkets, communities, kindergartens, parks and other play areas. The company has its own design team, which can develop molds according to customer requirements or design products according to the actual site of customers, and produce products of different specifications to meet customer needs.

Product features: more than ten years of rotational molding mold industry experience and independent research and development of large plastic rotary molding equipment, with 7 independent arm, four-station full-scale rotary forming rotomolding machine, in the structure to ensure that rotomolding products are not easy to fall off, no damage In the surface treatment, the pores and trachoma are eliminated, and the wall thickness of the product is uniform and reliable. The plastic is made of South Korean imported LLDPE plastic powder, which is in line with the international environmentally friendly edible grade. The iron parts are made of hot-dip galvanized pipe and spray-coated. The complete set of products is more resistant to use than traditional FRP and blow molded products. It has a longer service life in outdoor high and low temperature and various complicated environments, and is resistant to abrasion and weathering and is not easy to fade.

In addition, the design team is a strong guarantee for the development of our company. In the design of molds and accessories, we strictly follow the EN1176 standard and ensure the safety of the products from the source. The design of the complete set of products is based on the outstanding overall effect, and the reasonable and safe frame structure wins the praise of the customers.

Tianqi Rotomolding follows the tenet of “all responsible for customers”, continuously improves the quality of its personnel and product advantages, continuously improves and builds lean products, and passes third-party certifications such as CE, ISO, TUV GS EN1176, SGS factory certification, and better. Serve the customers and create a bright future for the company's strategic goal of “going to the world and rolling the world”.